Cloupor M3 Dry Herb Starter Kit Instructions

Cloupor M3 Dry Herb Starter Kit

Purchase the Cloupor M3 Dry Herb Starter Kit Here

Instruction Manual

Thanks for purchasing the Clouper Kit!

Your Kit includes:

  • 1 Cloutank M3 glassomizer
  • 2 replacement heads
  • 1 brush for cleaning tank
  • instructions
  • 1 650mah spinner battery
  • 1 USB charger

DSC_0086

How to Fill:

Turn the tank upside down and unscrew the bottom coil unit.  Pack dry herb into the chamber of the glassomizer.  Reattach the bottom coil unit and attach to the battery.  To empty the chamber after use simply remove bottom coil unit and push down on mouthpiece to eject chamber contents.  You can use the brush to clean and clear the airflow holes.  In some cases, build up can clog the holes and you’ll need to clean the holes using a pin or needle.

 

DSC_4837small

 

DSC_4847small

 

 

How to change your coil:

Turn the glassomizer upside down and unscrew the bottom coil unit.  Unscrew the coil from the unit and discard.  Screw the new coil into the unit and you’re all set.  Reattach glassomizer to battery.

 

DSC_0176small

 

A little bit about your Battery:

The battery has a manual button which you press while inhaling.  There is a lock feature on the battery so if you find it’s not working, hit the button 5 times quickly.  This will turn it on or off.  The battery only works while the button is pressed, so you must hold it down the entire time you’re inhaling.  The battery also has a cut-off function.   If you hold button down for longer than 15 seconds, it will stop outputting voltage and the light will flash 5 times.  It can be used again when it finishes flashing.

Charging your Battery:

When the battery power is low, the button LED flashes 15 times when pressing to indicate the battery needs charging.  To charge the battery, gently screw the ego spinner into the ego USB charger.  The charger indicator will glow red while the battery is charging and green to indicate when the battery is fully charged.  It typically takes about 4 hours to charge the battery.

You should use only the dedicated ego USB charger for the ego battery.

Fully charge the battery before using to maintain a good battery life.

Warning:

  • Do not charge unattended
  • Do not use if the clearomizer is empty
  • Avoid altering the battery in any capacity and do not immerse in water
  • Only charge with appropriate charger and do not use that charger with any other type of battery

 

Should you have any other questions or concerns, please contact Canada Vapes directly at support@canadavapes.com or 1-844-286-VAPE.