Voopoo DRAG 4 Starter Kit
$94.99
Description
- CRC Certified
- 170W Output
- Smart Mode Automatic Coil Recognition
- 0.0001s Extreme Ignition
- Uses Voopoo PnP Replacement Coils
Canada Vapes Voopoo DRAG 4 Starter Kit Review
Voopoo’s newest mod kit, the DRAG 4 is here! The Voopoo Drag 4 (CRC) is a vape mod that is designed for advanced vapers who are looking for a high-performance device. It is a regulated box mod that is powered by two 18650 batteries (not included) and has a maximum power output of 170 watts. The device features a large and intuitive TFT display that displays all the relevant vaping information such as wattage, temperature, and battery level.
The Drag 4 also features the GENE.FAN 3.0 chipset, which provides a range of advanced features such as temperature control, smart wattage, and power compensation mode. The device is compatible with a wide range of atomizers and tanks and features a 510 connection with a spring-loaded pin.
In addition, the Voopoo Drag 4 has been designed with safety in mind, featuring a range of safety features such as overheat protection, short-circuit protection and overcharge protection. Overall, the Voopoo Drag 4 is a high-performance and reliable vape mod that is ideal for experienced vapers looking for a powerful and feature-rich device.
Your Voopoo DRAG 4 Starter Kit Includes:
- 1 x Voopoo DRAG 4 Device
- 1 x Voopoo UFORCE- K Tank (4ml)
- 1 x Voopoo TW3 0.3Ω PnP Mesh Coil
- 1 x Voopoo TW2 0.2Ω PnP Mesh Coil
- 1 x Type-C USB Cable
- 1 x Spare Glass
- 1 x User Manual
- 1 x Warranty Card
- 1 x Chip Card
Voopoo DRAG 4 Starter Kit Features:
Type-C Fast Charge
The Voopoo DRAG 4 uses a Type-C USB charging port to refill its battery quickly. This charging port is available just about anywhere, from computers, to game consoles, to televisions. This allows you to plug in your device just about anywhere! If you want to charge this in your car we have available car adapters for your use.
Adjustable Air Flow
The Voopoo DRAG 4 Starter Kit features an innovative infinite dual airflow, it lets you slide the airflow until the desired amount is set. Located at the bottom of the tank, you can find the dual airflow to customize to your liking.
Smart Mode
The smart mode feature on the DRAG 4 allows the consumer to place a coil in the device and attach it to the mod. Once the pod is attached the device will recognize the coil and set it to the correct wattage for the coil installed. This helps with preventing burning coils upon first use if you forgot that you had the wattage set to high. You can still set the wattage to what you prefer after the pod is connected.
Frequently asked questions about the DRAG X Vape Kit:
Q: How long does the DRAG 4 battery last?
A: This really depends on personal use. The Voopoo DRAG 4 uses dual18650 battery (not included) that you can find HERE. This device should last 12 hours on a full charge. With it utilizing the USB-C charging port makes it so you can get charged up quickly if you are running low!
Q: What is your warranty on the Voopoo DRAG 4?
A: As with all of our starter kits, the DRAG 4 comes with a full 60 day warranty against manufacture defects. This warranty only begins when the product arrives to your door.  For any issues with your Drag 4, you may call us at 1-844-286-VAPE, or fill out a support ticket.  You can also contact Voopoo support directly at [email protected].
Q: You offer different coil options. Which should one should I buy?
A: Great question! One of the reasons we love the Voopoo DRAG 4 system is that it can accommodate both Direct Lung vapers and Mouth-to-Lung vapers. It can use the new Voopoo PnP TW series coils, or any of the regular PNP coils that you have used in the past. If you are ever in need of more personalized advice because call customer service at 1.844.286.VAPE. Good luck!
Voopoo DRAG 4 Product Specifications:
- Size: 147.3 x 52.4 x 25.4mm
- Battery: Dual 18650 Batteries (Not included)
- Power Range: 5 – 170W
- Resistance Range: 0.5 – 3.0Ω
- Output Voltage: 3.2 – 8.4V
- Tank Capacity: 4ml
- Material: Zinc Alloy + PCTG
- GENE.FAN 3.0 Chip
Downloads and other information:
The official DRAG 4 Starter kit information page can be found HERE.
1 review for Voopoo DRAG 4 Starter Kit
You must be logged in to post a review.
g7m7t1 (verified purchase) –
This is a great Starter Kit, and I recommend it for anyone interested in buying it. However, I didn’t carefully check during my reading and found that it comes with the UFORCE-K Tank, not the UFORCE-L Tank that I wanted as shown in the product picture. I really prefer the UFORCE-L Tank, but perhaps it’s not available for purchase in Canada