Flavour Beast Beast Mode Max 3 Disposable Vape

The Flavour Beast Beast Mode Max 3 Disposable Vape is a high-capacity rechargeable device designed for adult vapers who want more control over power, airflow, and flavour intensity. It combines a 20 mL e-liquid capacity, an 850 mAh rechargeable battery, four selectable output modes, and a smart display in one ready-to-use format.

With an estimated capacity of up to 60,000 puffs, the Beast Mode Max 3 is built for extended use. Actual puff count will vary according to the selected power mode, puff length, airflow setting, and individual usage habits.

The device arrives prefilled with 20 mg/mL nicotine and does not require separate pods, coils, or e-liquid. Once the internal battery runs low, it can be recharged so you can continue using the remaining e-liquid.

Key Features

• Up to 60,000 puffs
• 20 mL prefilled e-liquid capacity
• 20 mg/mL nicotine strength
• 850 mAh rechargeable battery
• Four selectable power modes
• Single and dual-mesh coil configurations
• Burst of Flavour feature in Beast and Max Modes
• Smart display for battery, e-liquid, and mode information
• Adjustable airflow control
• Draw-activated operation
• Rechargeable disposable design
• Wide selection of iced and non-iced flavours

Four Power Modes

The Beast Mode Max 3 gives you four output settings, allowing you to balance battery efficiency, flavour strength, and vapour output.

Eco Mode

Eco Mode runs at 10W using the 1.0Ω single-mesh coil. It is the most efficient setting and is designed to extend battery charge and e-liquid usage.

This mode is suitable when you prefer a more controlled draw or want to reduce how quickly the device uses its remaining battery and liquid.

Normal Mode

Normal Mode runs at 14W through the 1.0Ω single-mesh coil. It offers a moderate balance between efficiency and flavour output.

For regular daily use, Normal Mode provides a practical middle ground without moving into the stronger dual-mesh settings.

Beast Mode

Beast Mode operates at 18W using the 0.5Ω dual-mesh coil. This setting produces a stronger flavour response and fuller output than Eco or Normal Mode.

Beast Mode also activates the device’s Burst of Flavour feature, which provides an initial flavour boost during the first 0.5 seconds of each puff.

Max Mode

Max Mode runs at 23W through the 0.5Ω dual-mesh coil. It provides the device’s highest available power and strongest output.

Like Beast Mode, Max Mode activates the Burst of Flavour feature. Because it operates at the highest wattage, it will generally use battery charge and e-liquid faster than the lower modes.

Burst Of Flavour Technology

In Beast and Max Modes, the Beast Mode Max 3 delivers a brief flavour spike during the first 0.5 seconds of each puff. After the initial boost, the device continues at the selected mode’s regular output.

This creates a more immediate flavour response at the beginning of the draw without requiring a separate boost button or manual firing control.

The feature is limited to Beast and Max Modes because these settings use the device’s dual-mesh coil configuration.

Single And Dual-Mesh Performance

The Beast Mode Max 3 changes coil behaviour according to the mode you select.

Eco and Normal Modes use the 1.0Ω single-mesh coil, keeping power consumption lower and helping prioritize efficiency.

Beast and Max Modes activate the 0.5Ω dual-mesh coil, increasing the active heating area for a fuller and more intense output.

This dual-system approach gives the device a wider performance range than a disposable with one fixed coil and one fixed output level.

Smart Display

A built-in smart display helps you monitor the device without relying on guesswork. It shows:

• Remaining battery level
• Remaining e-liquid level
• Current operating mode

The display makes it easier to know when the device needs charging and when the internal e-liquid supply is approaching the end of its usable life.

It also helps confirm which output mode is currently active, reducing the chance of using a higher-power setting unintentionally.

Adjustable Airflow Control

The Beast Mode Max 3 includes adjustable airflow, allowing you to change how restricted or open the inhale feels.

Closing the airflow creates a tighter and more concentrated draw. Opening it creates a looser inhale with greater airflow.

Airflow also influences how the selected mode feels. A lower-power mode with tighter airflow can provide a more controlled experience, while Beast or Max Mode with more open airflow can feel fuller and more forceful.

Flavour Selection

The Beast Mode Max 3 collection includes a broad range of fruit, berry, mint, tropical, and cooling flavour profiles. Options include both iced and non-iced varieties, allowing adult users to choose between a cooling finish and a profile without added cooling.

Flavour availability may vary according to inventory and provincial regulations.

How To Use The Beast Mode Max 3

1. Remove the device from its packaging.
2. Remove any protective plugs or stickers.
3. Select your preferred operating mode.
4. Adjust the airflow control to your preferred draw.
5. Inhale through the mouthpiece to activate the device.
6. Monitor battery and e-liquid levels on the display.
7. Recharge the device when the battery indicator is low.

Start with Eco or Normal Mode to understand the draw and flavour output before switching to Beast or Max Mode.

Device Specifications

• Product type: Rechargeable disposable vape
• Estimated puff count: Up to 60,000
• E-liquid capacity: 20 mL
• Nicotine strength: 20 mg/mL
• Battery capacity: 850 mAh
• Dimensions: 105.82 x 51.38 x 24 mm
• Airflow: Adjustable
• Display: Battery, e-liquid, and operating mode
• Activation: Draw activated
• Power modes: Eco, Normal, Beast, and Max

Mode Specifications

• Eco Mode: 1.0Ω single mesh, 10W
• Normal Mode: 1.0Ω single mesh, 14W
• Beast Mode: 0.5Ω dual mesh, 18W
• Max Mode: 0.5Ω dual mesh, 23W

What Comes In The Package

• 1 x Flavour Beast Beast Mode Max 3 Disposable Vape

Frequently Asked Questions

How Many Puffs Does The Beast Mode Max 3 Provide?

It is rated for up to 60,000 puffs. The actual number will vary depending on puff duration, airflow, selected mode, and usage frequency.

Which Mode Provides The Longest Use?

Eco Mode is the most efficient setting because it runs at 10W through the single-mesh coil. Higher-power settings will use battery charge and e-liquid more quickly.

What Is The Difference Between Beast Mode And Max Mode?

Both settings use the 0.5Ω dual-mesh coil and activate the Burst of Flavour feature. Beast Mode operates at 18W, while Max Mode increases output to 23W.

Does It Show The Remaining E-Liquid?

Yes. The smart display shows the remaining e-liquid level along with the battery level and current mode.

Can The Device Be Refilled?

No. It is a sealed, prefilled disposable device. The battery can be recharged, but the internal e-liquid reservoir is not designed for refilling.

Does It Have Adjustable Airflow?

Yes. The airflow control lets you make the draw tighter or more open.

What Nicotine Strength Does It Contain?

The Beast Mode Max 3 is available with 20 mg/mL nicotine on the official Canadian product pages.

Safety Information

This product contains nicotine and is intended only for adults of legal vaping age. Nicotine is highly addictive.

Keep the device away from children and pets. Do not use it if the casing, battery, or charging port appears damaged. Avoid exposure to excessive heat, water, or direct sunlight. Do not dispose of the device in household garbage where dedicated battery or electronic-waste disposal is available.

Additioanl Resources

Check out our entire Disposable Vapes collection