Vaporesso GTI Coils

Vaporesso GTi Dual Mesh Coils – Available at Canada Vapes

The Vaporesso GTi Dual Mesh Coils are replacement coils designed for Vaporesso’s GTi tank platform. Unlike the standard single-mesh GTi options, these coils use a dual-mesh heating structure to increase the active heating area and provide more even heating across the coil.

At Canada Vapes, the GTi coils available are the Dual Mesh versions, making this listing specifically suited to users looking for the newer dual-mesh GTi coil design.

Key Features

• Genuine Vaporesso GTi replacement coils
• Dual Mesh heating structure
• Designed for DTL vaping
• Larger airflow channels
• Even heating across a wider coil surface
• Compatible with Vaporesso GTi platform tanks
• Available in multiple resistance options
• Sold in packs of 5 coils

GTi Dual Mesh Performance

The main difference with these coils is the use of a dual-mesh configuration.

Instead of relying on a single mesh heating element, the Dual Mesh design uses two mesh sections to increase the active heating surface. This helps the coil heat more evenly and supports consistent vapour and flavour production throughout use.

The GTi Dual Mesh range is intended for direct-to-lung vaping and works best with compatible Vaporesso tanks using open airflow.

Available GTi Dual Mesh Options

Canada Vapes carries the Vaporesso GTi Dual Mesh Coils in three resistance options, allowing users to choose the power range that best suits their preferred DTL setup.

GTi 0.15Ω Dual Mesh Coil

The 0.15Ω GTi Dual Mesh Coil is the highest-power option in the range and is designed for users who prefer a warmer vape and stronger vapour output.

• Resistance: 0.15Ω
• Recommended wattage: 75–90W
• Best around: 85W
• Vaping style: DTL

GTi 0.2Ω Dual Mesh Coil

The 0.2Ω GTi Dual Mesh Coil provides strong DTL performance at a slightly lower power range.

• Resistance: 0.2Ω
• Recommended wattage: 60–75W
• Best around: 65W
• Vaping style: DTL

It offers a useful balance between vapour production, flavour output, and power consumption.

GTi 0.4Ω Dual Mesh Coil

The 0.4Ω GTi Dual Mesh Coil operates at a more moderate wattage while retaining the dual-mesh heating design.

• Resistance: 0.4Ω
• Recommended wattage: 50–60W
• Best around: 55W
• Vaping style: DTL

Designed For DTL Vaping

The GTi coil platform is designed primarily for direct-to-lung vaping.

The larger airflow channels allow more air to move through the coil, while the dual-mesh structure helps maintain even heating during higher-airflow use.

These coils are better suited to open DTL setups than tighter MTL-style devices.

GTi Coil Compatibility

Vaporesso GTi Dual Mesh Coils are compatible with tanks and kits that use the GTi coil platform, including:

• Vaporesso iTank
• Vaporesso iTank 2
• Vaporesso iTank T
• Selected Vaporesso GEN Series kits
• Selected Vaporesso ARMOUR Series kits

Compatibility is determined by the tank, not simply the mod.

GTi coils are not interchangeable with Vaporesso GTX coils.

How To Install A GTi Dual Mesh Coil

1. Remove the tank from the device if needed.
2. Open the tank base or coil access section.
3. Remove the old coil.
4. Insert the new GTi Dual Mesh coil firmly into place.
5. Reassemble the tank.
6. Fill the tank with compatible e-liquid.
7. Let the coil sit for approximately 5–10 minutes before first use.
8. Start near the lower end of the recommended wattage range and increase gradually if needed.

Proper priming helps the cotton saturate before heating and can reduce the risk of dry hits.

When To Replace Your GTi Dual Mesh Coil

Replace the coil when you notice:

• Reduced flavour
• Lower vapour production
• Burnt or unusual taste
• Persistent flooding or leaking
• The coil no longer performs normally within its recommended wattage range

Coil life will vary depending on wattage, e-liquid formulation, frequency of use, and vaping habits.

Specifications

• Product: Vaporesso GTi Dual Mesh Coils
• Coil type: Dual Mesh
• Vaping style: DTL
• Compatible platform: Vaporesso GTi
• Available options at Canada Vapes: 0.2Ω Dual Mesh and 0.4Ω Dual Mesh
• Pack size: 5 coils

Frequently Asked Questions

Are These Standard GTi Mesh Coils Or Dual Mesh Coils?

These are the Vaporesso GTi Dual Mesh Coils sold by Canada Vapes.

What Is The Difference Between GTi Mesh And GTi Dual Mesh?

The Dual Mesh version uses two mesh heating sections instead of a single mesh structure, increasing the active heating area and supporting more even heating.

Which Devices Use Vaporesso GTi Dual Mesh Coils?

They are compatible with Vaporesso tanks built around the GTi platform, including the iTank, iTank 2, iTank T, and selected GEN and ARMOUR kits.

Are GTi Coils Compatible With GTX Coils?

No. GTi and GTX are separate Vaporesso coil platforms and are not interchangeable.

Are These Coils For MTL Vaping?

No. The GTi Dual Mesh platform is designed primarily for DTL vaping.

How Long Should I Prime A New GTi Dual Mesh Coil?

Allow the coil approximately 5–10 minutes to absorb e-liquid after filling the tank before first use.

How Many Coils Are In A Pack?

Each pack contains 5 Vaporesso GTi Dual Mesh Coils.

Additional Resources

Check out Vaporesso Collection at Canada Vapes